Insta-Synth 11 All round degreaser

Bio degradable, skin friendly, food grade cleaner that cleans grime, greasy substances & dirt from all surfaces. Accidental contact with food is safe. It is safe for the skin and gives out aroma of fresh oranges. It can lift the most stubborn greasy parts and yet remains soft on the humans. It is completely natural by composition and it is safe even for the ozone layer in the atmosphere. It contains earth friendly propellants. 

Applications: IS 11 can be used for Greasy parts & components, Soiled skin, Oil soaked metals before welding, general cleaning of large surfaces etc. Ideal for Pharmaceuticals and food industry. 

Insta-Synth 12 Dehumidifier spray

An aerosol spray that dehumidifies and coats the cleaned surface to prevent future short circuiting. Extremely hygroscopic in nature. The spray has a unique formulation that draws humidity from the electrical circuits into itself and dries it out. The use of IS 12 prevents short circuiting and hence enhances safety. A preventive spray can handle such risky situations. It protects the area even after the initial action. 

Applications: Wires, electrical contacts,  switches, junction box, panel parts, buss bars, joints etc.

Insta-Synth 14 Spray cleaner for sensitive electronic parts

IS 14 Aerosol cleaner is meant for sensitive electronic components and circuits. Does not corrode plastic or rubber parts. It will only attack the dust and grime and will not harm the sensitive electronics. It will prevents erosion of fine circuit tracks. The propellant is non volatile and CFC free. The cleaning action is fast and does not involve wiping of the parts. It evaporates to complete dryness. The cleaning agent is non conductive and leaves no residue. 

Applications: Printed circuit boards, Electronic panels, switches, contacts, breakers, motors, starters, generators etc.

Insta-Synth 15 Molybdenum disulphide (MOS2) Spray

IS 15 delivers on the surface a vey fine coating of subgranulated Molybdenum Disulphide that gives dry lubrication. IS 15 comes out of the spray nozzle with a fast evaporating carrier that disappears after the MoS2 is evenly dispersed. After the application the surface remains 'touch dry'. It offers a very high film strength that cannot be dislodged even with a load of 100,000 pounds. The lubricant will not get extruded out despite very high pressure. Simply clean the surface and spray it. The black coating of MoS2 will remain in place even in outdoor and splashy conditions. It is ideal for open areas as the dust will not stick to it.

Applications: It is well suited for Open gears, machine tables, sliding surfaces, sprockets, guides etc.

Insta-Synth 16 Belt dressing spray

IS 16 is a reliable belt dressing spray that enhance the belt life by twice. This spray Lubricant for belts is reliable in all kind of belts.It not only enhances belt-life but also prevents slippages. It can be used to all kind of cross sections of belts. It is best used on new belts before installations when the belt pores are still clean and open. It is safe for even heavy duty belts.

Insta-Synth 17 Anti Jam spray

IS 17 is a popular all round spray that loosens any jammed assembly due to rust, dirt or contaminants. It's triple action frees the jamned parts quickly. The spray penetrates, loosens and prevents further rusting on any surface. It acts on almost all surfaces and helps in saving time and effort. This is a must for all maintenance departments. Polytetrafluoroethylene and other anti-wear additives contribute to give you long lasting lubrication and protection. It is many times effective than commercially available sprays. It is low volatile.

Applications: Jammed nuts and bolts, tight fitting parts in assemblies, rusted parts etc.

Insta-Synth 19 Outdoor protection compound

IS 19 is now available only in bulk. It was discontinued in spray forms. Please inquire for packing sizes. It can be sprayed manually however with pressurised vessels and hand held sprays. The fine invisible layer of the IS 19 protects surfaces from water damage and outdoor environments. It protects walls, structures, chimneys, roofs from water, moisture and UV rays from sun. It has lots of domestic and civil engineering applications too. It shields the surface from external attack. It is recommended for vertical surfaces however. It has a safety rating of IP 65.

Applications: Tin shades, buiding exteriors, pipelines, structures, canvas, tanks, pillars etc. 

Insta-Synth 20 KIT For Detecting Cracks

Crack finding kit consisting of 3 aerosols for detection of invisible cracks in metals. Precision Die penetrating testing kit gives precise crack location. 

This simple to use system detects cracks and flaws in metals. Supplied as 3 separate spray cans each forming a part of the crack detection process -

1. Cleaner Spray - cleans the area to be crack tested
2. Penetrant Spray - A spray dye which penetrates even the smallest pores and imperfections
3. Developer Spray - This lifts the dye from the surface to indicate any imperfections as a red mark.

Industry's most reliable and widely used penetrant inspection method for the detection of cracks and surface discontinuities in ferrous & non-ferrous test materials. Inquire for pack sizes.